What to do if the floor heating is broken?
With the arrival of winter, geothermal heating systems have become the main heating method for many homes. However, in a hot topic on the Internet recently, many users reported that the geothermal system failed, causing the indoor temperature to fall below standard. This article will combine hot topics and hot content in the past 10 days to provide you with detailed solutions and attach structured data for reference.
1. Common faults and causes of geothermal systems
According to discussions on the entire network in the past 10 days, geothermal system failures are mainly concentrated in the following aspects:
| Fault type | Possible reasons | frequency of occurrence |
|---|---|---|
| Is the ground hot or not? | Blocked pipes, insufficient water pressure, thermostat failure | 45% |
| Floor heating water leakage | Broken pipes and loose joints | 30% |
| Geothermal is noisy | Water pump failure, air in the pipe | 15% |
| Thermostat failure | Battery exhausted, circuit failure | 10% |
2. What should I do if the floor heating is broken? Step by step solution
1.Check water pressure: The normal operation of the geothermal system requires a certain water pressure (usually 1-2bar). If the water pressure is too low, the heating may not be effective. You can check the water pressure through the pressure gauge. If it is lower than the standard value, you need to add water to the normal range.
2.Exhaust treatment: The air in the pipes will hinder the circulation of hot water, causing the floor to be hot. Find the exhaust valve on the water distributor, slowly open the exhaust valve, and then close it until water flows out.
3.Clean pipes: If the geothermal system has not been cleaned for a long time, scale or impurities may accumulate in the pipes. It is recommended to carry out professional cleaning every 2-3 years, or use geothermal cleaning agent to handle it yourself.
4.Check thermostat: Thermostat failure may cause geothermal heating to fail to start normally. First check whether the battery is exhausted, and secondly confirm whether the temperature setting is correct. If the problem is not resolved, the thermostat may need to be replaced.
5.Contact a professional: For complex problems such as water leakage and water pump failure, it is recommended to turn off the water source immediately and contact professional maintenance personnel to avoid greater losses.
3. Comparison of popular geothermal maintenance services across the network
The following are the geothermal maintenance service providers recommended by netizens in the past 10 days for your reference:
| service provider | Service scope | average response time | User rating (5-point scale) |
|---|---|---|---|
| Company A | Major cities across the country | 2 hours | 4.8 |
| Company B | North China | 4 hours | 4.5 |
| C Company | East China | 3 hours | 4.7 |
4. Tips to prevent geothermal failures
1.Regular maintenance: Before the heating season every year, it is recommended to conduct a comprehensive inspection of the geothermal system, including water pressure, pipes, thermostats, etc.
2.Avoid frequent switching: The geothermal system starts slowly, and frequent switching not only consumes energy, but may also shorten the life of the equipment.
3.Pay attention to indoor temperature: It is recommended to control the indoor temperature between 18-22℃. If it is too high, it will increase the burden on the system.
4.Keep the floor clean: Avoid placing heavy furniture or carpets on the geothermal floor to avoid affecting the heat dissipation effect.
5. Hot discussion among netizens: Geothermal maintenance cost reference
According to discussions across the Internet, geothermal maintenance costs vary greatly depending on fault type and region. The following is the average cost statistics in the past 10 days:
| Maintenance items | Average cost (yuan) | Cost range (yuan) |
|---|---|---|
| Pipe cleaning | 300 | 200-500 |
| Replace the water distributor | 800 | 600-1200 |
| Thermostat replacement | 200 | 150-300 |
| Pipe repair | 500 | 400-800 |
Geothermal system failures can be a headache, but with the right troubleshooting and treatment methods, most problems can be solved. If you encounter a situation that you cannot handle yourself, be sure to contact professional maintenance personnel in time to ensure that heating in winter is not affected.
check the details
check the details
en
