How to replace the heater water tank if it is broken?
Recently, heating equipment repair has become one of the hot topics in winter, especially the replacement of the heating water tank (also called the expansion tank). Many families encounter leaking or malfunctioning water filling pipes during the heating season and are in urgent need of solutions. This article will introduce in detail the replacement steps, precautions and common problems of the heating water tank to help you solve the problem quickly.
1. The function and common faults of the heating water bucket
The heating water hopper is an important component in the heating system and is mainly used to adjust the water pressure and volume in the system. Common faults include:
| Fault type | Symptoms | Possible reasons |
|---|---|---|
| water leakage | Water dripping from the bottom or joint of the water bucket | Seal ring aging and corrosion |
| Abnormal water pressure | System pressure fluctuates high and low | Internal diaphragm rupture |
| Unable to hydrate | The water level does not rise after adding water | Water inlet valve blocked or damaged |
2. Steps to replace the heating water pipe
The following are the detailed steps for replacing the heating water pipe:
| steps | Operating Instructions |
|---|---|
| 1. Turn off water and power | Cut off the water supply to the heating system and turn off the power supply to the boiler |
| 2. Drain the system | Open the drain valve and drain the water from the pipe |
| 3. Disassemble the old water filling bucket | Use a wrench to loosen the connecting nut and remove the old water filling bucket |
| 4. Install the new water bucket | Align the new water bucket with the interface and tighten the nut |
| 5. Check the tightness | Check for leaks after refilling with water |
| 6. Restore the system | Turn on the power and test the system operating status |
3. Precautions
1.Safety first: Be sure to turn off the power and water source before operation to avoid electric shock or burns.
2.Choose a matching model: The new water bucket needs to match the pressure and capacity of the original system.
3.Check other parts: If it is damaged frequently, it may be that the system water pressure is too high or there is a water quality problem.
4. Frequently Asked Questions
| question | Solution |
|---|---|
| Still leaking after replacement | Check whether the sealing ring is installed in place or replace it |
| System pressure is unstable | It may be that the air is not exhausted and needs to be exhausted again. |
| Water bucket prices vary greatly | It is recommended to choose regular brands and avoid inferior products |
5. Summary
Replacing the heating water bucket is a highly technical operation. If you lack experience, it is recommended to contact professional maintenance personnel. Regular inspection of the heating system can effectively prevent failures and ensure safe and efficient heating in winter.
check the details
check the details
en
