
Foam Fire Fighting Vehicle, Chongqin Isuzu Truck Chassis 6X4
Suizhou Lishen Special Vehicle Co., Ltd.- Type:Pumper
- Certification:ISO9000, CCC
- Volume:7001-10000L
- Emission Standard:Euro 4
- Transmission Type:Manual
- Payload:20T
Base Info
- Model NO.:SLS5350
- Fuel:Diesel
- Drive Wheel:6×4
- Horsepower:251-350hp
- Condition:New
- Carry:Water Mix Foam
- Transport Package:Nude
- Specification:10250*2490*3490
- Trademark:SLS
- Origin:Hubei, China
- HS Code:8705309000
- Production Capacity:30sets,2 Months
Description
General
Cabin
In addition to the original vehicle equipment, installation of 100W alarms, rotary lamp switch, Power take-off control switch, lamp switch and indicator light, The cab top is mounted with long row red blue alarm lamp.
Chassis
Foam tank capacity
2000L Made in high quality steel with anti-corrosion
Leading water time ≤ 50s, within water depth 7m
Low pressure flow:60L/s/1.0Mpa, middle pressure flow: 30L/s/2.0Mpa
2,pipeline system:
Suction pipe: Equipped with a backward way pipe DIM:135mm,the water from then tank into the pump,installed a DIM 135MM manual butterfly valves,tank connection with pump.
Suction culvert: it fit water inlet at the rear of pump DIM 150mm,connect the suction pipe,connect way is Bluetooth connect button.
Water /foam pipeline: at rear of pump have 4x80mm dim ball control outlet Normal pressure water
At both side of pump have 4x65mm dim ball control outlet Middle pressure water.
1x100mm dim cannon pipeline,flexible joints,100mm ball control.
Injection line:fit Dim 50mm circulating water pipe,through the pump directly inject water to the tank.
Fit 2x80mm dim injection line on both side of truck.
Drain water: In order to protect the pump and ball valve,fit the drain water valve at the lowest place.
Cooling pipes: for PTO to deal with complex situations of work, fit cooling pipes and control valve.
3, The power take off (PTO)
MODEL : sandwich
Manipulation : solenoid valve control
Cooling: Forced adjustable water-cooled
Lubrication: splash oil lubrication
4,Fire water/foam dual monitor
Model:PL48 flow: 48L/S, Pressure:1.0Mpa:Water range ≥ 60m, foam range ≥ 55m,Rotary angle: 360°horizontal.
5,The instrument panel and board equipment:
Instrument panel located in the vehicle rear pump chamber, with a control panel and provided with adequate lighting; all the control handle, switch, indicating lamp nearby have metal corrosion formed Chinese identification; water pipeline layout and operation steps illustrate, using metal corrosion plate fixed in the proper position. All illustration plate and signs are persistent and high adhesion, which can withstand influence due to temperature and climate change caused; 10 years will not fall off or illegible.
Liquid level, Tachometer; pressure gauge; vacuum pressure gauge; oil temperature gauge; voltmeter; pump speed regulating device,20V power switch, pneumatic control valve switch.
6,Tool and pump store house
Material: Skeleton made of high quality steel,mask checkered aluminum oxide bonding structure.
Structure: All steel welded frame structure, around three sides is Aluminum alloy doors,fit flip-slip pedals,can stand a man working.